Emulex 375 - Manual (Page 6)

E MULEX M ODEL 375 SAN S TORAGE S WITCH
U SER ’ S G UIDE C HAPTER 1: I NTRODUCTION
E MULEX C ORPORATION 3
P ART N UMBER 00041369-002 R EV . B
F
EATURES
The Emulex Model 375 SAN Storage Switch has the following features:
• High Performance Fibre Channel Switching:
• Wire speed non-blocking Crossbar switch core
• Single 20-port InSpeed™ SOC 320 ASIC with embedded SERDES
• Multiple simultaneous conversations between ports
• Traffic routed directly to destination ports
• 2 Gb/s or 1 Gb/s performance across all ports
• Aggregate bandwidth of 80 Gb/s
• Supports cascades up to 3 switches and up to 126 host and storage devices
• No complex fabric services or buffers
• Effortlessly connects to any vendor’s fabric
• Patent-pending technology:
• Fairness and Prioritization–ensures that devices all have guaranteed access, or
explicitly have prioritized access, over all other devices in a system.
• Stealth
TM
Intelligent Change Manager–delivers maximum stability through automatic
elimination of state and change notification system disruptions and unprecedented
control of disruptive events.
• Automatic Trunking–enables fully-multiplied throughput and bandwidth, failover pathing,
and dynamic load balancing and device prioritization.
• Advanced diagnostics, performance monitoring, and fault isolation including continuous switch
and port monitoring and automatic bypass of problematic or unused ports.
• Port Smart Settings, which are predefined port-level configurations that optimize switch
performance and stability.
• One-Step Zoning, including overlapping/non-overlapping zones with port or AL_PA-based
zoning.
• Switch management using the embedded http-based Web server, Command Line Interface
(CLI), or Simple Network Management Protocol (SNMP).
• Full-rack, 1U size for easy installation (optional 19" rack-mounting kits available).
• Redundant fans and two hot-swappable, auto-sensing, load sharing, universal power supplies
for high availability.
• Fibre Channel ANSI Standards Compliance
I N S PEED ™ T ECHNOLOGY
InSpeed™ technology is an advanced switching architecture that couples a non-blocking crossbar
switch with a unique switch port logic and per-port SERDES. This results in the industry’s highest
density Fibre Channel switch on a chip (SOC). The port logic is based on Fibre Channel-Arbitrated Loop
(FC-AL), an ANSI standard (X3T11) designed to provide shared bandwidth over low-cost media.
This architecture enables the switch’s router to send data directly from one port to another, allowing for
multiple, simultaneous conversations between ports—effectively multiplying bandwidth. InSpeed
provides the same performance as complex fabric switches that support FC-SW2. InSpeed can even
exceed fabric switch performance in entry-level SAN environments, where the overhead associated with
longer name addressing and services is not beneficial.