Ecom Instruments Ex-GSM 01 EU - Manual (Page 21)

62
Select As required, to set up the package data connection when it is nee-
ded by a program. It will be disconnected when the program is ended.
Select Always online to set the telephone so that a connection to a pa-
ckage data network is automatically established when the phone is turned
on.
Modem settings
You can connect the telephone to a compatible PC via infrared or a data
cable (DC G01) and use the telephone as a modem to establish a packa-
ge data connection to a PC.
To specify the connection settings for the PC, select Menu > Settings >
Connections > Package data > Settings for package data > Active access
point, activate the desired access point and then select Change active
access point. Select a name for the access point and enter a nickname
for the currently selected access point. Select Package data access point
and enter the name of the access point (APN, Access Point Name), to
establish a connection with an EGPRS network.
7.7.7 Making calls
Select
Menu > Settings > Calls and one of the following options:
Automat. Volume control, to set the telephone so that the loud speaker
volume is automatically adjusted to the background noise.
Call diversion, to redirect incoming calls (network service). If the functions
for call blocking are active, you will not be able to redirect calls under
some circumstances.
Accept call with any key > On, in order to accept incoming calls by quik-
kly pressing any key (excluding the end key or the left and right selection
keys).
Automat. Redialing > On, so that after an unsuccessful call attempt, the
telephone tries up to ten times to establish a connection to the desired
telephone number.
Speed dial > On, to activate the Speed dial. To select, hold down the
respective number key.