Empire Comfort Systems LSU18RR-1 - Manual (Page 6)

23370-1-1107 Page 6
Apply loose material (glowing embers) per appropriate Installation Instructions and Owner's Manual. Replacement of loose material
(glowing embers) must be purchased from Empire Comfort Systems, Inc. Application of excess loose material (glowing embers) may
adversely affect performance of the heater. WARNING: All previously applied loose material must be removed prior to reapplication.
Replacement Loose Material (glowing embers) Part Number
LSU18RR-1 15970
LSU24RR-1 15970
LSU30RR-1 15970
Platinum Bright Embers PE-20-1
Note: A single layer of embers is to be used when applying Platinum Bright Embers (alone or in combination with production embers)
to the burner.
Log Placement
LS(18,24,30)RR-1 Logs
Figure 3
Attention: Do not use Figures 1 to 3 to order replacement logs. Refer to Page 10, Parts List and Parts View to order logs for your
appropriate model number.
The following WARNING applies when log set is installed onto an unvented gas burner assembly.
WARNING: This appliance is equipped for (natural or propane) gas. Field conversion is not permitted.
LOG PLACEMENT
G
D
C
K
L
A
F
I
H
B
E