Emerson Radio iP105BK - Manual (Page 25)

24
Setting The Alarm Time And Alarm Mode (Buzzer/Radio/iPod)
NOTE: We suggest that you set the Alarm time with the power ‘On’ and the
Function set to the AUX mode. This will keep the display backlighting ‘On’ and
make the settings easier.
1.) Depress and hold the ALARM/PRESET UP
button for 3 seconds. This display changes to
wake up time and the Hour digits and the Buzzer
indicator begin to flash.
2.) While the hour digits are flashing press either
the / or / buttons to move the
hour display back or forward to the correct wake
up hour. Be sure to observe the AM/PM indicator
to make sure you have set the wake up hour
correctly.
3.) Press the ALARM/PRESET UP button again.
The hour digits stop flashing and the minute digits
begin to flash.
Press either the / or / buttons to
move the display back or forward to the correct
wake up minute.
4.) When the correct wake up time is showing on
the display press the ALARM/PRESET UP
button once more.
The minute digits stop flashing and the display
returns to the current time, but the Buzzer
indicator remains in the display to show that
the Alarm is ‘On’ and set for the Buzzer mode.
iP105_052207.p65 22/5/2007, 11:37 24