Electrolux EDC 77150W - Manual (Page 21)

Drying cycle lasts an
unusually long time.
Note:
After around 5 hours
the drying cycle ends
automatically (see
„Drying cycle complete“) ● Lint filter clogged.
● Heat exchanger clogged with
lint.
● DELICATE button pressed
and load volume too big.
● Load volume too big.
●
Laundry insufficiently
predrained.
● Clean lint filter
●
Clean heat exchanger.
●
DELICATE is only suitable for
use with loads of up to 3 kg!
● Reduce load volume.
● Laundry must be adequately
pre-drained.
something not working electrolux 21
Malfunction Possible cause Solution
When pressing a button,
the corresponding
button flashes several
times. ● Washing protection.
After the start of the program-
me, the option can no longer
be set.
● Turn the programme knob to
OFF. Set the programme
again
Drum light does not
work ● Programme selector in OFF
position.
● Defective light bulb
● Turn programme selector to
LIGHT or to any programme
● Replace light bulb (see next
section).
Programme inactive,
Water rreservoir ffull
light illuminated.
● Condensate tank is full.
●
Empty condensate tank, then
start programme with
START/PAUSE button.
Drying cycle ends
shortly after programme
starts. END
light illuminated.
● Not enough washing loaded
or washing loaded is too
dry for selected programme.
● Select time programme or
higher drying level (e.g. EXTRA
DRY instead of STRONG).
When a button is
pressed, Err appears in
the multi-display.
● Washing protection. After the
start of the programme, the
option can no longer be set.
●
Turn the programme knob to
OFF. Set the programme again.
125985630 gb.qxp 2006-07-20 08:30 Page 21