Quick start guide, Setting the built-in mics, Inserting microsd cards – Tascam Portacapture X6 32-Bit 6-Channel Multitrack Field Recorder User Manual

Page 8: Preparing the power supply

Advertising
background image

NOTE

i

This unit cannot recharge Ni-MH batteries. Use
a commercially available recharger.

i

The included alkaline batteries are for confirming
operation of the unit. For this reason, they might
not last very long.

Inserting microSD cards

Open the microSD slot cover and insert a microSD
card.

Preparing the power supply

This unit can be powered in two ways: with AA
batteries or by external power using the USB port.

Using AA batteries

1.

Remove the battery compartment cover, and
install 4 AA batteries with their

¥

and

^

marks as shown in the battery compartment.

2.

Reattach the battery compartment cover.

Quick Start Guide

Setting the built-in mics

Using the built-in microphones

This unit’s built-in mics are adjustable, enabling the
mic format to be changed by setting their angles.

True X-Y method

This enables recording with a clear stereo field and
reduced phase difference.

A-B method

This enables recording with a wide left–right
stereo field.

True X-Y
method

A-B method

Turn the mics
to change their
orientations.

Hold the rings indicated by the black arrows and
turn the built-in mics to change their angles.
The built-in mics will not be set properly if their
rings have not been turned until they stop.

8

TASCAM Portacapture X6

Advertising