Art PS8-II 9-Outlet Power Sequencer - Manual (Page 5)

4
OPERATION
POWER SWITCH
The PS8-II has a master POWER switch for the rear outlets. This switch glows when the unit is
enabled. If the rear REMOTE is not being used, turning on this switch initiates a power on sequence
for the rear outlets. Turning off the switch initiates a power off sequence and the rear outlets are then
sequenced off.
NOTE: The front panel Main POWER switch must remain in the ON position in order for the remote
switching to function.
CH1-CH8 LED INDICATORS
The CH1-CH8 LED indicators, on the front panel, indicate the current power (on/off) status. If power
is available at a rear outlet then it’s corresponding front panel indicator will be lit.
SEQUENCE DELAY
The front panel sequence delay control allows you to set the delay time between activation of each
outlet. Its range is from 0.5 to 2.0 seconds. If set to 2.0 seconds, for example, there will be a 2 second
delay between each outlet turning on or off in the sequence (16 seconds total delay from initial power
on to CH8 power on). This gives you a wide range of control when setting the application of power to
your system, thereby minimizing any unwanted effects.