Marantz CINEMA 50 9.4-Channel Network A/V Receiver (Black) - Manual (Page 52)

o Example layout when using three sets of
height speakers
C
FL FR
SW R S L S
TML TMR
FHL FHR
RHL RHR
For each speaker connection, refer to the following.
0
“Connecting speakers to the speaker terminals” ( v p. 42)
0
“Connecting an external power amplifier” ( v p. 43)
0
Set “Floor” to “5ch” and “Height Sp” (or “Dolby Sp”) to “6ch” in the menu when
connecting in this configuration. ( v p. 211)
FHR FHL RHR RHL C SR SL TMR TML SW
FR FL
Power amplifier
z 1 z 1
z 3 z 3
z 2
z 1 The Top Middle Speaker can be connected to the Surround Back terminal
instead of the Surround Back Speaker.
z 2 You can change the Front Height Speakers, Top Middle speaker and Rear
Height Speakers to any Height/Ceiling/Dolby Atmos Enabled speakers in the
“Amp Assign” - “Layout” setting. ( v p. 216)
z 3 You can connect the external power amplifier to the Height 2 or Top Middle
channel instead of the Front channel. Use the “Pre-out” setting in the menu to
set the channel connected to the external power amplifier. ( v p. 218)
Contents Connections Playback Settings Tips Appendix
52
Front panel Display Rear panel Remote Index