PYLE Audio PDA6BU Stereo Receiver with Bluetooth - Manual (Page 5)

PDA6BU
4
3. Track / Folder Searching Knob:
* Turn this knob clockwise to search through all of the tracks inside the USB flash drive / SD Card. Each track will
appear by the name of the track. It will show the tracks or folders chronologically (from when the files were
loaded onto the USB flash drive / SD Card. Press the knob to begin playing the desired track.
First the tracks on the root file will be displayed and then the tracks that are in folders.
*
Press this knob to activate the folder searching function. Once pressed the word “ FOLDER” will begin flashing
on the display screen. Then, turn this knob clockwise to search the folders inside the USB flash drive / SD Card.
Press the knob to begin playing the tracks from that folder.
1. SD Card Reader/USB Port: for using external media on this device, just plug your SD/USB into these ports.
2. LCD Screen: all information regarding external media or this device will be displayed from this screen
3. Folder and track selection
4. Power Button: Press this button to power the unit on and off.
5. Microphone Volume Control Knob: Turn this knob to adjust the volume of microphone
6. Microphone Echo Volume Control Knob: Turn this knob to adjust the microphone echo volume level.
7. Bass Control: Turn this knob to adjust the low frequencies of Channel 1 & Channel 2.
8. Master Volume Fader- Move the fader up and down to adjust the master volume.
9. Treble Control: Turn this knob to adjust the high frequencies of Channel 1 & Channel 2.
10. Balance: Control the volume balance from left to right.
11. Input Selector: Turn this button to choose the favorable input
12. MICROPHONE INPUTS: KARAOKE or EXTERNAL MIC connects to these jacks.
13. IPOD/MP3 JACK - IPOD/MP3 connects to this jack.
14. REMOTE RECEIVER: To receive the remote control signal
15. POWER LED INDICATOR: When you turn on the unit, the LED will be on.
16. AUDIO INPUT: Connect the audio output jacks of DVD/CD , to these jacks.
17. LINE OUTPUT: Connect the RECORD input jacks to these jacks.
18. FM ANTENNA CONNECTOR: Connect for AM and FM antennas.
19. SPEAKER OUTPUT: Connect your speaker system to these terminals.
20. BLUETOOTH ANTENNA: Pease pull the antenna out when using Bluetooth input
21. POWER SUPPLY: Connect to AC 11 OV/60Hz & 220V/50Hz outlet.
22. POWER VOLTAGE SELECTOR: 110V/220V