Power failure during sleep timer operation – Emerson Radio CKD2330 User Manual

Page 32

Advertising
background image

3 1

NOTES:

• You can shut the unit off manually before the Sleep Timer counts down to “00”

by pressing the STANDBY/ON

button at any time. Or just cancel the Sleep

Timer by pressing the SNOOZE button.

• Remember that if you are falling asleep to CD you will also wake to CD, and if

you fall asleep to the radio you will also wake to the radio.

• If you are falling asleep to CD, the system will only operate until the CD ends.

If you set the Sleep Timer for 59 minutes but your CD is only 45 minutes long,

the music will stop after 45 minutes.

IMPORTANT:

When the SLEEP function is on, the Radio Frequency will always appear on

the display. The CLOCK SET and ALARM SET functions will be disabled,

you can still check the ALARM wake up time by pressing the ALARM SET

button, but pressing the CLOCK SET button has no effect during Sleep Timer

operation.

Power Failure During Sleep Timer Operation

If you experience a power failure during Sleep Timer operation an incorrect time

(such as "3545") may appear on the display. If this occurs please perform the

following steps to correct the time display:

1.) Press the STANDBY/ON

button to turn the system 'On'.

2.) Press the SLEEP button once.

3.) Press the STANDBY/ON

button again to turn the system 'Off'.

The time display will return to normal.

CKD2328_2330_B091103.p65

11/9/2003, 14:52

31

Advertising
This manual is related to the following products: