Epson 30s Series - Manual (Page 4)

5
Adjust the image
1
If the image is too low, too high, or off to the side, use the quick
image adjustment dials to adjust its position.
If the picture looks like this or this
straight ahead. Make sure you position MovieMate at a 90-degree
angle to the screen or wall. You can then use the left/right quick
image adjustment dial to center the image.
2
Use the zoom ring to adjust the size of the image.
3
Use the focus ring to sharpen the image.
4
To enlarge or reduce the aspect of the ratio of the image,
press the button on the remote control.
6
End a DVD movie
1
Press to stop playing the DVD.
2
Press to open the tray and remove the DVD. Close the tray.
3
Press the Power button to turn off the lamp.
Left/right dial Up/down dial
Zoom ring
Focus ring
PepperUG_QS_CPD22196.indd 2 6/21/06 11:26:46 AM