Installing the mount adapter – HyperX QuadCast USB Condenser Microphone User Manual
Page 16
Advertising
Document No. 480HX-MICQC.A01
HyperX QuadCast
TM
Page 15 of 16
Installing the Mount Adapter
1. Secure the included mount adapter onto a microphone boom arm. The mount adapter supports 3/8”
and 5/8” thread sizes.
2. Remove both the thumb screw and nut from the microphone stand.
3. Remove the microphone stand from the microphone.
4. Align the mount adapter with the microphone mount holes and secure the adapter with the thumb
screw and nut.
Advertising