Reloop sPodcaster Go USB Microphone for Streaming Podcast - Manual (Page 5)

8 9
ENGLISH ENGLISH
INSTALLATION
- Fasten the Reloop sPodcaster microphone thread [5] to the included table stand, to guarantee a flawless, stable
and vibration-free positioning.
- To achieve an ideal recording result with your highly sensitive sPodcaster condenser microphone you should try
different installation and adjustment types.
OPERATION
1. CONNECTING HARDWARE
Boot your computer (Mac/PC) as usual and wait until everything is completely loaded. Now connect the Reloop
sPodcaster Go via USB [4] to your computer.
2. CONFIGURE SOFTWARE (FOR INSTANCE: WINDOWS 10)
As soon as connecting the Reloop sPodcaster to the computer, you will find „USB PnP Sound Device“ in your audio
settings. Due to the integrated plug and play technology no drivers are required. The sPodcaster should be selected
automatically as standard device for recordings.
3. VOLUME ADJUSTMENT
You can adjust the signal output level via the Volume +/- Buttons [1].
Note: If you connect headphones to the 3,5 mm Jack Output [3], the Volume +/- Buttons [1] adjust the main
output level.
4. MUTE
You can mute the microphone-input signal by pressing the Mute Button [2].
5. STARTING A RECORDING
Now start your preferred recording software. The Reloop sPodcaster Go has to be adjusted as recording source in
your software.
Now you can start recording.
MAINTENANCE
- Regularly check the technical safety of the device, for damages to the cable or housing as well as wearout of wear
parts such as dials.
- If it is to be assumed that the safe operation is no longer feasible then the Reloop sPodcaster Go must be discon-
nected and secured against accidental use.
- It must be assumed that a safe operation is no longer feasible if the device bears visible defects, if the device no
longer functions, following longer storage under unfavourable conditions or after major transport stress.
TECHNICAL INFORMATION
Power/voltage: ................................................. 5.0V DC/ 500 mA (USB)
Frequency range: ............................................. 50 Hz – 18 kHz
Sensitivity: ....................................................... -44 +/- 5 dB (at 1 kHz , 0 dB = 1V/PA)
Dynamic range: ................................................ 93 dB
S/N ratio:.......................................................... 59 dB (at 1 kHz)
Max. input sound pressure: ............................. 115 dB
Connection: ...................................................... USB 2.0 (Micro-USB), 3,5 mm jack output
Directivity: ....................................................... cardioid
Supports resolution/sample rate up to: ............ 16 bit / 48 kHz (recommended recording setting 44.1 kHz)
Operating system: ............................................ Windows 7, 8, 10 / macOS 9 / OS X
Dimensions: ..................................................... 146,2 mm x 63 mm x 42,8 mm (w x d x h)
Weight: ............................................................. 140 g
Scope of delivery: ............................................ USB microphone, foldable table stand, micro USB cable
and transport bag, Ableton Live not included
Subject to alterations.
Illustrations similar original product.
Misprints excepted.
Reloop - Solutions for DJs
Global Distribution GmbH & Co. KG
Schuckertstr. 28
48153 Münster - Germany
Fax: +49 251.60 99 377