Extron electronic Extron IPL T S4 - Manual (Page 41)

IPL T S Series Interfaces • Software Setup 3-21
Step thirteen: change device settings (if desired)
If for any reason you need to change any of the previously
configured settings:
1
. Click Tools > Change Device Settings.
2 . Select a device.
3 . Click Settings to open the Settings drop-down listing.
4 . Select and change the desired setting(s), for example:
Set Mail Server...
, Set Gateway..., Set Subnet Mask..., etc.
N Use Set Mail Server... in the drop-down listing to
identify the local mail server's IP address, domain, and
passwords.