Eiki EIP-25 - Manual (Page 6)

5
Power LED (Indicator light)
• When the projector is on, Power LED will blink. Press “Power” button to
enter screen, Power LED remains lit continually.
Temp LED (Indicator light)
• When fan malfunctions, the screen will shows the message stating “fan
error, system is forced to turn off!”. Temp LED remains lit continually.
• When the temperature is unusual, screen will shows the message stating
“temperature error, system is forced to turn off!”. Temp LED blinks once
every
half of second .
Lamp LED (Indicator light)
•
Lamp LED will turn on automatically when lamp is on. Lamp LED
will turn off automatically when the lamp is off. .
Power (On/Standby)
• Press to turn power off and on.
• Please refer to the “Starting and turning off the projector” section in Page
13.
Menu (OSD menu)
• Press this button to display the menu, press once again to close the menu.
•
If no other action is taken after the menu is opened, it will disappear
automatically after 20 sec.
Source (Signal source)
• Select the signal of Analog RGB, Analog Y Pb Pr, Digital RGB, Composite
Video, S-Video and Component Video in proper order, and automatically
adjust the phase and frequency.
Auto/Enter (confirm/Sync)
• When using menu, this button is the Enter function.
• Under general condition, this button is the Sync function.