Epson 80211b - Manual (Page 30)

26
You see the Browse for Printer window:
.
7. Click the + next to Entire Network , then click the + next to Epson_lpr
and select your printer. (Make sure the IP address matches your print
server’s IP address.)
8. Click OK , then click OK again. Click Apply on the Details tab.
9. To test the connection, click the General tab and click Print Test Page .
Wait for the page to print.
If the test page prints, click Yes , then click OK to close the Properties
window.
If it fails to print, try the following:
■ Make sure that the printer and print server are connected and that
both are turned on.
■ Check WP-Admin to make sure you have a signal (see page 16).
■ Make sure you clicked Apply in step 8.
Now you’re ready for wireless printing. For instructions, see the Printer Basics
book that came with your printer.
Click to expand
the network path
Select your
network printer
ZLUHOHVVVHUYHUERRN 3DJH  )ULGD\ 0D\     30