Euro-Pro XSC410 - Manual (Page 2)

5. Fold the other side of the towel in
the same way and place the corner
under the cloth holder. (Fig. D).
Fig. D
Using Your Steam Cleaner with
Triangular Brush
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS cont.
WARNING: Always insure the unit is “UNPLUGGED” from the wall
receptacle prior to attaching or removing accessories.
Fig. B
3. Fold the towel as shown in Fig. B
Attaching a Towel to the
Triangular Brush
To attach the triangular brush to the
angle adapter, hold angle adapter in
your right hand and the brush in your
left. Insert the angle adapter into the
triangular brush and turn 180° to lock
in place. See illustrations below.
100% white terry cloth towel can be fitted
on this brush, so as to absorb the dirt and
protect delicate surfaces.
Important: Please note that bristles may
break through thin towels. We recommend
that two (2) towels, laid one on top of the
other be used. This will ensure that the
brush bristles do not break through and
that the towels will be sufficiently absorbent
and retain as much dirt as possible.
Very Important : When installing the
towels to the triangular brush, ensure that
the towels do not cover the front and the
back of the brush. (See fig. D)
Fig. C
Fig. A
Step 1: The triangle brush w/ angle
adaptor connects either
directly to the handgrip or
may be used with the
extension tubes. To connect
the extension tubes to the
hand grip attach the
extension tubes one onto the
other and then onto the hand
grip. (See illustrations.) To
disconnect, reverse the
operation by pressing the
locking button and pulling the
two sections apart.
4. Place the corner under the cloth
holder. (Fig. C)
1. Prepare white terry cloth towel:
size 8” x 17” as shown in Fig. A.
2. Place the brush on top of the towel.
Locking
Button
Extension Tubes
Hand
Grip
Locking
Button
2 3