Epson DREAMIO EH-TW3500 - Manual (Page 26)

24
Viewing Images at a Preset Image Quality (Memory Function)
After using a subset of "Signal" and "Image" in the configuration menu to adjust the projected images,
the adjusted values can then be saved (Save Memory).
In addition, the saved data can be retrieved easily, so that you can enjoy viewing images with the
adjusted settings at any time (Load Memory).
Viewing Images at a Preset Image
Quality (Save Memory)
Saving, Loading, Erasing and Renaming
memory
Saving, Loading, Erasing
and Renaming memory
Adjust each of the settings to the values
to be saved.
Press , and select "Save
Memory".
The Save Memory screen is displayed.
Select the memory name to register the
adjustments to from Memory1 to 10, and
press or .
When preceding the memory name is
green, this indicates that adjustments are
already saved to memory.
Select an already saved memory name, and
press or .
A confirmation message will be displayed.
If you select "Yes", the previous memory
content is erased, and the current adjustment
values are saved.
Save Memory
Load saved memories.
Load Memory
All Items under Image Menu
Press , and select "Load
Memory".
The Load Memory screen will be displayed.
Select the target memory name.
Displayed for input sources other than computer
The adjustments that can be saved to memory are
as follows.
Up to ten adjustments can be saved to memory.
"Rename Memory" is only available for EH-
TW4500/TW4400.
Signal
Setup Level
Block NR * 1
Mosquito NR * 1
HDMI Video Range
Overscan
EPSON Super White
Noise Reduction
4-4 Pull-down * 1
2-2 Pull-down * 2
Advanced
Frame Interpolation * 1
Progressive
*1 EH-TW4500/TW4400 only
*2 EH-TW3500/TW2900 only