Gitzo GIGT1545T Traveler Series 1 Carbon Fiber Tripod - Manual (Page 10)

English
FIG. 1 – Set up
FIG. 2 – Extending the tripod legs
Turn all the twist locks of each leg 1/4 of a turn at the same time, then pull the
leg down and tighten the twists individually.
FIG. 3 – Reversible 3/8” or 1/4” fixing screw
FIG. 4 – Raising and lowering column
FIG. 5 – Leg angle adjustment
To change the leg angle to the lower position, close the leg slightly by folding
it towards the centre column, push the angle selector to the right, and lift
the leg.
FIG. 6 – Shooting from ground level
The tripod is supplied with a short column which is useful to get the camera
closer to the ground when the leg angle is set to the lower position.
FIG. 7 – Closing the tripod
FIG. 8A – Replaceable foot
In case the foot becomes worn, it can be replaced easily with a new foot
(available as a spare part).
FIG. 8B – Interchangeable foot
Interchangeable with Gitzo universal accessories such as the big foot, long
spike, etc.