ELICA EAT-E42ASX - Manual (Page 13)

13
www.zephyronline.com
J-Box cover
Conduit
Connect black wire from service panel to black or red in
junction box, white to white and green to green-yellow.
Close junction box cover.
21. Note: disregard this step if the hood has been fitted
with an internal blower.
Purchase and install a In-line blower (see
paragraph „Before installing the hood - Parts not
supplied“ for model reference).
22. For Ductless (recirculating) installations
Install one charcoal filter (available as an extra kit).
23. Check all light bulbs to make sure they are secure
in their sockets.
Turn power on in service panel.
Check lights and blower operation.
24. Install filters.
25. Install duct cover with 4 screws.
Note: Upper Duct Cover may be placed upside
down to hide (or unhide) ventless slots.
Upper
duct cover
Lower
duct cover
Duct
cover
support
bracket
Duct cover
support bracket
If range hood does not operate:
• Check that the circuit breaker is not tripped or the
house fuse blown.
• Disconnect power supply. Check that wiring is
correct.
Inst
allation