NZXT H5 Flow RGB Mid-Tower Case (Black) - Manual (Page 21)

2 0
H5 FLOW
2.12 BOTTOM FAN REMOVAL
Please refer to the instructions on cable bar removal for easier removal of the bottom fan.
1
Release the two screws.
2
From the rear side of the PSU shroud,
push and lift on the air duct as indicated
to release the air duct and bottom fan.
3 From the front side of the shroud, lift the air
duct and remove it from the case.
4
Remove the screws to
release the fan from
the air duct.