TP-Link MC220L Gigabit SFP Media Converter User Manual

Enlarge your ethernet network

Advertising

Gigabit Ethernet Media Converter

Note: MC220L needs to be plugged in with an SFP module to work normally. It is recommended to use a TP-Link SFP module on MC220L, because other vendors’

SFP modules may be incompatible.

LC-SC Fiber Cable

Package Contents: Media Converter, Power Adapter, User Guide

Scenario 1: Connect Devices with and without Optical Interfaces

Ethernet device

with optical interfaces

Media Converter

1000Base-SX interface

Ethernet device

without optical interfaces

Gigabit Ethernet interface

Twisted-Pair Cable

Note:
1. Either two MC200CMs or two MC210CSs can work cooperatively. Two MC220Ls with the same SFP module can work cooperatively.
2. An MC220L can also cooperate with an MC200CM or an MC210CS. However, the mode and wavelength of the SFP module used in MC220L must be the same as the opposite end.
3. Connect the TX port of one converter to the RX port of the other using a fiber cable.

Scenario 2: Connect Devices without Optical Interfaces

Fiber Cable

Twisted-Pair Cable

Ethernet device

without optical interfaces

Media Converter

Ethernet device

without optical interfaces

Enlarge Your Ethernet Network

For technical support and other information, please visit

http://www.tp-link.com/support, or simply scan the QR code.

MC200CM/ MC210CS/ MC220L

Note: MC200CM is used as an example throughout this guide. Other models may differ in appearance.

Gigabit Ethernet interface

Advertising