Electrolux DISHLEX DX303 - Manual (Page 20)

Cancelling the "delay start"
To cancel a delay start in progress
you have to reset the dishwasher.
Simultaneously press and hold the
two program buttons positioned
over the word Cancel, until all the
program lights illuminate.
Cancelling a delay start also
cancels the selected washing
program. In this case you have to
set the washing program again.
Interrupt or cancel a washing
program in progress ONLY if it’s
absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.
Interrupt a washing program in
progress:
● Open the dishwasher door; the
program will stop. Close the door;
the program will start from the
point at which it was interrupted.
● Press the On/Off button, all lights
will turn off. Press the On/Off
button again; the program will start
from the point at which it was
interrupted.
Cancel a washing program in
progress
● Simultaneously press and hold the
two program buttons positioned
over the word Cancel, until all the
program lights illuminate. The
washing program has been
cancelled.
If a new washing program is to be
selected, check that there is
detergent in the detergent
dispenser.
End of the washing program
● The dishwasher will automatically
stop.
● The Ready indicator light will
illuminate.
● The light of the program just ended
will remain on.
● The digital display shows zero.
1. Switch off the dishwasher by
pressing the On/Off button.
2. Open the dishwasher door, leave it
ajar and wait a few minutes before
removing the dishes; in this way
they will be cooler and the drying
will be improved.
20 electrolux daily use
117994350.qxp 12/20/2006 5:46 PM Page 20