Electrolux LAVAMAT 51165 - Manual (Page 21)

Operating Instructions
21
Changing the spin speed / Selecting the rinse hold
function
0 If required, change the spin speed for the final
spin or select
o (RINSE HOLD):
Continue to press the Spin Speed/
o (RINSE
HOLD) button until the desired spin speed (or
o/RINSE HOLD) indicator is illuminated.
• If the
Ì indicator is illuminated, the final spin cycle will commence
with 500 revolutions per minute for the programmes
t (COTTONS/
LINEN) and ECO (ENERGY SAVING), and with 450 revolutions per
minute for the other programmes.
• If the
o (RINSE HOLD) indicator is illuminated, the washing remains
in the final rinse water and is not spun.
• If none of the indicators are illuminated, the final rinse will be auto-
matically adjusted according to the wash programme:
3 The spin speed for the intermediate spin cycle depends on the selected
programme and cannot be changed.
Starting the Wash Programme
0 1. Check that the water tap is open.
2. To start the wash programme, press the O/s (START/
PAUSE) button. The wash programme starts.
3 If L (END) flashes 4 times when the O/s (START/
PAUSE) button is pressed, the door is not closed properly. In this case,
push the door in firmly, and press O/s (START/PAUSE) again.
–
t (COTTONS/LINEN)
1100 revolutions per minute
– ECO (ENERGY SAVING) 1100 revolutions per minute
–
} (EASY-CARES)
1000 revolutions per minute
–
à (DELICATES)
1000 revolutions per minute
–
s (WOOL)/Ñ (SILK)
P (Handwash)
1000 revolutions per minute