Epson LABELWRITER SE450 User Manual
Technical reference, Dymo labelwriter se450 label printer
Advertising
Table of contents
Document Outline
- Introduction
- Configuring the Host Computer for RS-232 Serial Interface
- Programming Overview
- Command Reference
- Alphabetical Command List
- Commands by Function
- Commands
- 20h - FFh Printable Characters
- CR Carriage Return
- DC4 Cancel Double Wide Mode
- ESC A Return Printer Status
- ESC a Return Hardware Status
- ESC B Set Dot Tab
- ESC c Set Print Temperature to Low
- ESC D Set Bytes per Line
- ESC d Set Print Temperature to Medium
- ESC E Form Feed
- ESC e Set Print Temperature to Default
- ESC F 1 n Feed n Lines
- ESC g Set Print Temperature to High
- ESC h Set Print Speed to Fast
- ESC i Set Printing Speed to Barcode
- ESC J Feed n Lines
- ESC L Set Feed Length
- ESC M Set Font to 12 cpi
- ESC P Set Font to 16 cpi
- ESC Q Set Top Margin
- ESC S Set Font to 20 cpi
- ESC T Set Font to 7 cpi
- ESC U Set Font to 10 cpi
- ESC V Return Firmware Revision
- ESC W Wrap Data
- ESC X Set Horizontal Starting Position
- ESC Y Set Vertical Starting Position
- ESC y Set 203 x 203 dpi
- ESC z Set 136 x 203 dpi
- ESC * Reset to Defaults
- ESC @ Reset to Power-up Condition
- ETB Raster Mode Compressed Graphics
- FF Form Feed
- GS A Starting Position of Bar Code
- GS DC2 Set Font to Double Height
- GS DC3 Cancel Double Height
- GS d Feed n Text Lines
- GS h Set Barcode Height
- GS k Print Barcode
- Data Matrix Barcode
- PDF417 2D Barcode
- GS l Draw Line in Landscape Mode
- GS L Set Feed Length
- GS q Print UPC/EAN Checksum
- GS RS Set Inverse Print Mode
- GS S Return Printer Status
- GS T Select Line Wrap/Truncate Modes
- GS t Set Characters per Line in Landscape
- GS US Cancel Inverse Print Mode
- GS u Set Characters per Line in Portrait
- GS V Set Print Orientation
- GS W Set Bar Code Element Width
- GS w Set Barcode Module Width
- GS ~ Enter Debug Mode
- GS * Landscape Mode Graphics
- HT Horizontal Tab
- LF Line Feed
- SO Set Font to Double Wide Mode
- SYN Raster Mode Graphics
- The Caret Feature
- Character Codes
- Configuration Menu
- Printer Specifications