Electro-Harmonix Memory Toy Pedal - Manual

MEMORY TOY
Analog Delay with Modulation
+Congratulations on your purchase of the Electro-Harmonix MEMORY TOY …a
compact analog delay that takes its heritage from our 1970’s Memory Man and the
legendary Deluxe Memory Man. Like the Memory Boy, the MEMORY TOY is based
on the Deluxe Memory Man analog circuit. A modulation switch allows quick access
to lush analog chorus.
— POWER —
— OPERATING INSTRUCTION and CONTROLS —
Connect your guitar to the INPUT jack of the MEMORY TOY and the AMP jack to
your amplifier. The MEMORY TOY can be used in combination with other effects
devices. Experiment with any combination to develop your own unique sound. The
footswitch toggles between effect and true bypass modes.
DELAY – Controls the delay time of your MEMORY TOY . The range of delay time
is from 30ms to 550ms. Turn the delay time clockwise to increase the delay
amount.
BLEND – The BLEND control allows you to vary the mix of direct and delayed
signals from 100% dry when set counter-clockwise to 100% wet at full clockwise.
FEEDBACK – The FEEDBACK control increases the number of delay repeats or
multiple echoes. At high settings the unit will begin to self-oscillate. Fairly high
feedback with short delay settings produces a reverb type of effect.
MOD Switch – When set to the ON position, the MOD switch will enable a slow
modulation on the delay time similar to the chorus modulation of the Deluxe
Memory Man. Set the MOD switch to the OFF position to disable all modulation.
INPUT JACK – Connect the output of your instrument or another effects pedal to
this jack. The input impedance presented at the INPUT jack is 1 M  .
AMP JACK – Connect the AMP jack to your amplifier input or the input of another
effects pedal.
STATUS LED and FOOTSWITCH – When the STATUS LED is lit, the Memory
Toy is in effect mode. When the LED is off, the Memory Toy is in true bypass
mode. Use the FOOTSWITCH to toggle between the two modes.