Bag and filter instructions – Euro-Pro GC130HS User Manual

Page 5

Advertising
background image

GETTING TO KNOW YOUR

GARBAGE CAN & CENTRAL VAC SYSTEM

1.

Lid Release Button

2.

Lid

3.

Cover

4.

Garbage Bin

5.

Handle

6.

Outer Metal Enclosure

7.

Vacuum Bag Cover

8.

Vacuum Bag Holder

9.

Pre-Motor Filter Cover

(Filter not shown)

10. HEPA-Type Filter Cover

(Filter not shown)

11. Base
12. Dust Inlet Cover
13. Vacuum Bag Release
14. Extension Tube

(x2)

15. Crevice Tool
16. Dusting Brush
17. Small Turbo Brush
18. Flexible Hose
19. Floor Turbo Brush
20. Power Indicator Light
21. Vacuum Bag Full Indicator Light
22. Suction Intake
23. Power Button
24. Vacuum Bag

(x4) (Not shown)

Technical Specifications

3

Voltage:

120 V., 60 Hz.

Power:

12 A.

* Illustration may differ from actual product

INNER VIEW OF BASE

FRONT VIEW OF BASE

Bag and Filter Instructions

HOW TO CHANGE AND CLEAN
THE PRE-MOTOR FILTER

Note:

The pre-motor filter is located in

the base of the unit. (Fig. 15)

WARNING:

TO REDUCE THE RISK OF ELECTRIC SHOCK, THE POWER
CORD MUST BE DISCONNECTED BEFORE REMOVING
THE DUST BAG, THE PRE-MOTOR AND HEPA FILTER, OR
PERFORMING MAINTENANCE AND TROUBLE SHOOTING
CHECKS.

To change and clean the pre-motor
filter, perform the following:

1. Unplug unit.

2. Lift off the outer metal enclosure

from the base of the unit.

3. Remove the vacuum bag cover,

and remove the vacuum bag in
order to gain access to the pre-
motor filter.

4. Remove the pre-motor filter cover

by sliding it upwards. (Fig. 16) It
should slide off easily.

Fig. 15

Pre-Motor

Filter

Slide Pre-Motor

Filter Upwards

Pre-Motor

Filter Cover

Fig. 16

5. Remove the pre-motor filter and

clean it by rinsing it under
lukewarm water.
DO NOT WASH THE FILTER IN
THE WASHING MACHINE.

Allow the pre-motor filter to air dry
for 24 hours. It may only be put
back in the unit when it is
thoroughly dried.
DO NOT USE A HAIR DRYER OR
CLOTHES DRYER TO DRY THE
FILTER.

6.

Once the filter is put back into the
unit, replace the pre-motor cover
by aligning it with the grooves and
sliding it downwards until it is fully
in place.

WARNING:

NEVER OPERATE THE VACUUM WITHOUT THE
VACUUM BAG AND ALL THE FILTERS IN PLACE

10

Advertising