Energy Tech Laboratories 7900CTP - Manual (Page 7)

Setting Up | 7
Setting Up
Pre-installation Checklist
You will need the following components:
• Epson Stylus Pro 7900 printer
• Plate curing unit (PCU)
• Plate guide
• Epson DirectPlate Aluminum sample pack (12 × 18 inches )
• EFI ™ eXpress CTP software RIP CD
• Hexagonal (Allen) (2.5 mm/0.10 inch) wrench
• Teflon ® tape for use on plate guide
• THERMAX ® temperature strips