Epson 850 - Manual (Page 12)

Introduction
2
◗ At least 50MB of free hard disk space for storing images
(100MB is recommended)
◗ VGA, Super VGA, or better display adapter and monitor
◗ Double-speed CD-ROM drive (quad-speed or faster
recommended) for installing the printer software
◗ A shielded, twisted-pair parallel cable (6 to 10 feet long) to
connect your computer to the printer; the cable must have
a D-SUB, 25-pin, male connector for your computer and a
36-pin, Centronics
® compatible connector for the printer.
Macintosh System Requirements
To use your printer and its software with a Macintosh, your
system should have:
◗ Any Macintosh or Power Macintosh model except the
Macintosh +, Macintosh 512, Performa
® 410,
PowerBook ® 100, and some early versions of the
Macintosh, such as the II or Classic
◗ System 7.1 or later (7.5 or later recommended)
◗ At least 16MB of RAM (20MB or more is recommended)
◗ At least 50MB of free hard disk space for storing images
(100MB is recommended)
◗ 13-inch RGB display or better
◗ Double-speed CD-ROM drive (quad-speed or faster
recommended) for installing the printer software
◗ Standard Apple ® System Peripheral-8 cable or equivalent
(RS-422, 8-pin mini DIN male/male, Belkin F2V024
recommended)
Easint.fm5 Page 2 Tuesday, March 24, 1998 1:13 PM