Electrolux C68000K - Manual (Page 20)

Operating Instructions
88
Activating the Power Function
Using the power function “P” you can increase the power of both front
cooking zones for 10 minutes.
With this function you can, for example, bring a large quantity of
water rapidly to the boil or brown meat.
0 To switch on the power function, the cooking zone must be selected
(decimal point in the display). Touch the “Power-function”
r
sensor
field. A P appears in the display. The power function is now active.
3 The power function is activated for a maximum of 10 minutes. After-
wards, the cooking zone automatically switches to heat setting 9.
0 The power function can be cancelled as follows:
• Touch the “Power function”
r
sensor field.
• Touch the
-
sensor field.
1 As soon as the power function is activated for one of the front cooking
zones, less heating power is given to the rear cooking zone.
If the power function for the front right cooking zone is activated, the
rear left cooking zone can attain a maximum heat setting of “8”.
If the power function for the front left cooking zone is activated, the
rear right cooking zone can attain a maximum heat setting of “7”.
If a higher setting than 7 or 8 is set for the rear cooking zones, the
display for the rear cooking zone concerned will show the differing
settings alternately (e.g., 7 and 9).
As soon as the power function has ended (after a maximum of
10 minutes), the rear cooking zones automatically revert to their
previously set heat setting.