Epson CX6000 - Manual (Page 10)

10 Copying a Photo or Document
Copying a Photo
1. Make sure the Epson Stylus CX6000 Series all-in-
one is turned on.
2. Place a photo on the glass as described on page 7, or place multiple photos as
described on page 8. Be sure to close the document cover.
3. Load up to 20 sheets of letter-size, 4 × 6-inch, or 5 × 7-inch photo or matte
paper (see page 5 if you need instructions).
4. Press the Photo button.
5. Press the l or r button to select Restoration On
to automatically restore the colors in faded photos
as you copy. If your photos are not faded, select
Restoration Off .
6. Press the x Start button to scan and preview
your photos on the photo viewer screen.
7. Press the l or r button to view your photos.
8. Press the u or d button to select the number of copies you want of each
photo.
9. Press the paper type button to select Photo Paper or Matte Paper to print
borderless photos (without a white border). Select Plain Paper if you want
your photos printed with an .06-inch border.
10. Press the paper size button to select 4"x6" , 5"x7" , or Letter . Your photo will
be automatically sized to fit on the size of paper you select.
11. Press the x Start button to print your photos. The On light flashes and after
a moment the CX6000 Series starts printing.
If you need to stop copying, press the y Stop/Clear Settings button. Do not pull
out paper that is being printed; it will be ejected automatically to the output tray.
Note:
The copies may not be exactly the same size as the original.
Photo
button