Epson 36-714 - Manual (Page 8)

CARTON CONTENTS
Fig. 1 Parts
1. Cast Iron Extension
Wings (2)
2. Switch Assembly
3. Fence Holder
Brackets (2)
4. Drive Belt
5. Table Insert
6. Wrench Hook
7. Miter Gage Holder
8.
Splitter Mounting
Bracket
9. Blade Hex Nut
10. Blade Flange
11. 10” Carbide-
Tipped Blade
12. Blade Wrenches (2)
13. 4mm Hex Wrench
14. Dust Port
15. Locking Knobs (2)
16. Handwheel (2)
17. Miter Gage
18. Miter Gage Handle
19. Splitter/Guard
Assembly
Fig. 1
1
4
2
5
7
6
3
8
9
10
11
12
13
14
15
16
17
18 19
8
FOREWORD
FUNCTIONAL DESCRIPTION
The Delta 10” Hybrid Saw (36-714) has a powerful 1 3 /
4
HP induction motor that can handle tough cutting operations.
This table saw has a maximum depth of cut of 3 1 /
8
inches (79mm) at 90 degrees and 2 1 /
8
inches (54mm) at 45 degrees.
The maximum dado width with this saw is 13/16 inch (21mm). The saw comes with two cast iron extension wings, one
of three fence systems, see-through blade guard and splitter, table insert, equipment mounting hooks, a 10" diameter
blade, dust port for 4" hose and miter gage.
NOTICE: THE PHOTO ON THE MANUAL COVER ILLUSTRATES THE CURRENT PRODUCTION MODEL. ALL OTHER
ILLUSTRATIONS CONTAINED IN THE MANUAL ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT THE ACTUAL COLOR,
LABELING OR ACCESSORIES AND ARE INTENDED TO ILLUSTRATE TECHNIQUE ONLY.