Eton Solarlink ARCFR600R - Manual (Page 17)

17
SOLARLINK FR600 OWNER’S MANUAL
3) Press  or shortly to select the “COUNTY CODE” option.
4) Press <SELECT> shortly once to enter the county code
setting mode (MULTI, SINGL or ALL), which blinks in the
display.
5) If you don’t know your county code, select ALL with or
and press <SELECT> and then <MENU> TO EXIT. If you
know your code, don’t press SELECT and go to the next
section.
6) Press  or  shortly to select MULTI or SINGL and press
<SELECT>.
7) Press <SELECT> shortly again to enter the code. CODE 01
XXXXXX appears in the display, with 01 flashing.
8) Press <SELECT> again and the first digit of six starts
flashing. Press or  to set the first digit and then press
to go to the second digit, doing this again and again until
all six digits are entered.
9) If you’re in SINGL, press <SELECT> and then <MENU> to
exit. If in MULTI, go to the next step.
10) If you’re in MULTI and wish to enter more codes, press
<SELECT>.
11) 01 flashes. Press or  to go to another code setting
number (1-23 flashes) and press <SELECT>.
12) The first digit of six flashes, use or to set it and press
to enter the next number, doing this again and again
until all six digits are entered.
13) Press <SELECT> to choose another code number (1-23)
and when your finished press <SELECT> and then MENU
to exit.