Epson 925 - Manual (Page 61)

55
The numbers correspond to the brightness effects as shown
below.
4. Press the Brightness button to select the setting. The
Brightness icon stops flashing.
5. Press the Start button to start printing.
Note:
The effect of the Brightness feature is the same as the filter effects of
the same name. You cannot use both at the same time. If are the same
as the 4. Slightly brighter, 5. Brighter, 6. Slightly darker, 7. Darker
of the Filter effects, so you cannot use both of effects at the same time.
In this case, always the filter effects prior to the brightness setting.
However, it is possible to use the other combinations; for example,
Dark Sepia, Slightly bright monochrome with using both filter and
brightness setting.
Changing Default Settings
You can change the default settings to match settings you use
frequently. You can make different default settings for each Print
Mode, All, Index, One and Set. Any changes to the default settings
are saved, even if you turn off the printer.
1. Make settings that you want to use as defaults. Photo numbers
and the number of copies cannot be added.
Display
Brightness Darker Slightly
darker No
effect Slightly
brighter Brighter