Esoteric P-01 - Manual (Page 23)

23
Repeat mode
< Halting playback stops the repeat mode.
< This feature is not available for all discs.
< The following buttons cancel repeat mode:
STOP, OPEN/CLOSE, POWER.
Track repeat
When this is selected, the currently-selected track repeats. If
another track is selected during repeat playback, the newly
selected track repeats.
Disc repeat
The whole contents of the disc are repeated.
Programmed repeat
If programmed playback has been set up, the whole program
is repeated.
Pushing the REPEAT button cycles between REPEAT PGM
(program repeat) and REPEAT OFF (programmed playback
takes place).
Use the REPEAT button to select the repeat mode for
playback. Repeated presses of the REPEAT button cycle
between the following options:
REPEAT TRK
(repeat the track)
REPEAT DSC
(repeat the whole disc)
REPEAT OFF
(no repeat)
2 channel/Multi channel
When playback is stopped, use the 2CH/MULTI button to select
either 2CH (stereo) or MULTI (multi-channel surround) audio
output.
2ch
2-channel audio is output. When multi-channel data on SACD
is played back, the data from the center, sub-woofer, right
surround and left surround channels is mixed down to stereo
(front left and right channels). (The DOWN MIX indicator
lights on the display.)
Select this mode to listen music in stereo using two D-01
units.
Multi ch
Discrete 5.1-channel audio is output. Select this output mode
if you are using six D-01 units or the P-01 is connected to a
multi-channel D/A converter with IEEE 1394 cable.
< The 5.1CH indicator lights when the P-01 is switched to Multi
ch.