Epson Action Laser - Manual (Page 101)

HP Emulation
If you set the paper size
with a
print command that differs from the
size selected in SelecType, the message
PS
CHANGE appears. Press
the
CONTINUE/RESET
button to clear the error; the printer is set off
line.
After clearing the error, you have two options:
1. Change the
paper in the cassette; then enter SelecType and
change the paper size to match. Press
the ON LINE
button after
exiting SelecType to continue printing.
2. Alternatively, press the
ON LINE
button to continue printing on
the current paper. (The message
PAPER
SIZE
ERROR
appears
in the display.)
For certain nonstandard sizes of paper, you may need to use the
manual feed option described in Chapter 4.
Character clipping
If a character is partially outside the printable area, the HP LaserJet
does not print any portion of the character. The ActionLaser prints
that portion of
the
character
within
the printable area, making it
easier to tell when you have exceeded your margins.
Printer Modes 5-7