Ericsson Advanced Modular Receiver RX8200 User Manual

Page 21

Advertising
background image

Front Panel Control

4.4.1 Menu

Structure

The Front Panel menus and sub-menus, available on the LCD, provide the
configuration parameters that may be viewed, selected and/or modified.

System - Provides sub-menus for viewing/configuring the receiver hardware

and access parameters.

- Network – Enables the input and display of the addresses required to

communicate with the receiver. Access to the receiver Status page is also
available from this sub-menu.

- Build - Provides version and ID numbers for the hardware and software

products installed in the receiver. Also provides options for rebooting the
receiver and deactivating the Front Panel controls.

- Unit Serial Number - Displays the unit serial number.

- Factor - Provides receiver rebooting options.

- FP (Front Panel) – Enables viewing/configuring of the Front Panel lockout

facility, which allows the Front Panel controls to be deactivated.

Input - Provides sub-menus for viewing/configuring the Input Card (Satellite

Input Card, I/P Input Card or G.703 Input Card) parameters.

- Select/Primary Input - Enables the selection of the primary input for the

receiver.

- Select Satellite Input – Enables viewing and editing of the configuration

parameters for the Satellite Input Card, if fitted.

- IP Input Card - Enables viewing and editing of the configuration parameters

for the I/P Input Card, if fitted.

- Configure G.703 Input - Enables viewing and editing of the configuration

parameters for the G.703 Card, if fitted.

Service – Provides sub-menus for viewing/configuring the currently selected

service for decode from the input feed.

- Decode Service - Enables selection of the required decode service.

- Video – Enables selection of video services, such as the video component,

etc.

- Audio - Enables selection of audio services, such as the channel, etc.

CA Systems – Provides sub-menus for viewing/configuring Conditional Access

parameters that restrict and control access to the receiver and select the service
for decryption from the incoming feed.

- Service Table – Displays a summary of the CA features and the service ID

number.

EN/LZT 790 0009 R1A

2011-03-30

21 (44)

Advertising