Epson Artisan 837 - Manual (Page 18)

18 Faxing a Document
Sending a Fax From the Touch Panel
You can send a fax by manually entering a fax number, as described below.
Note: To set up and use a speed dial list or send a fax from your computer using the
Epson FAX Utility, see your online User’s Guide.
1. Place your original(s) for faxing (see page 7).
2. Press Home , if necessary, then select Fax .
3. Press , then use the numeric keypad to enter the fax number (up to 64 digits).
Then press OK .
4. Select Color or B&W .
Note: If the recipient’s fax machine prints only in black and white, your fax is
automatically sent in black and white even if you select Color.
5. Press OK , if desired, to see a summary of your fax transmission settings.
6. Press x Start to begin scanning and faxing your document. (To cancel, press
y Cancel .)
■ If you are scanning with the Automatic Document Feeder (see page 7), your
document is automatically scanned and faxed.
■ If you placed your document on the scanner glass, you can scan additional pages
after the first one is sent.
■ If the fax number is busy, you see a redialing message and the product redials
after one minute. To redial immediately, press
Redial .
Note: If you turn off the product, the following data stored in the product’s temporary
memory will be lost: received faxes that haven’t yet been printed, faxes scheduled to
be sent later, and faxes being retransmitted automatically.
Art837QG.book Page 18 Wednesday, April 27, 2011 4:07 PM