Eiki EIP-250 - Manual (Page 39)

37
SEL ENTER END
There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
Reset all adjustments to default settings
SEL.
Picture SCR - ADJ PRJ - ADJ Help
The items you can set with the “Help”
menu
“Help” menu n Page 48
• Vertical stripes or flickering image appear
Auto Sync
Clock
Phase
• Data image is not centered
Auto Sync
H-Pos
V-Pos
• Color is faded or poor
COMPUTER/COMPONENT or DVI (EIP-2600
only) input
Signal type: Auto/RGB/Component
S-VIDEO or VIDEO input
Video System: Auto/PAL/SECAM/
NTSC3.58/NTSC4.43/
PAL-M/PAL-N/PAL-60
DVI (Digital) input (EIP-2600 only)
Dynamic range: Auto/Standard/Enhanced
* The selectable items vary depending on the in-
put signal and the selected input mode.
“Help” menu