Encore electronic ENUWI-G2 - Manual (Page 5)

HARDWARE INSTALLATION
LED Indicator
LINK
The LINK LED lights green when ENCORE 802.11g Wireless USB 2.0 Adapter is
connected to a network successfully. Otherwise the LINK indicator blinks green
while the 802.11g Wireless USB 2.0 Adapter is access the wireless network.
Check the installation
The LED of ENCORE 802.11g Wireless USB 2.0 Adapter is clearly visible and the
status of the network link can be seen instantly:
1. When connected to the USB port and the driver were installed, the LNK LED
will start blinking, and it means that the device is starting to scan an 802.11g
wireless device near the 802.11g Wireless USB 2.0 Adapter.
2. While the 802.11g Wireless USB 2.0 Adapter linked up to the Access Point or to
other Wireless LAN station, the LINK LED will always light up.
3