ELAN Home Systems iPod Integration Dock VIA!migo - Manual (Page 35)

©2007 ELAN Home Systems • All Rights Reserved
33
¸
How to Switch Between NTSC and PAL
Switching between between NTSC and PAL can be accomplished using the
template in VIA!TOOLS software (see VIA!TOOLS “Help” file) or by issuing the
following commands:
1. Undock the iPod from the dock
2. Issue the “Home” IR Command or navigate to the Main page and
then:
A. To set the VIA!migo to NTSC (default) issue the following
commands:
Left, Up, Left, Up.
B. To set the VIA!migo to PAL mode, issue the following commands:
Left, Down, Left, Down.