Epson CX7000F - Manual (Page 51)

Replacing Ink Cartridges 51
13. Close the scanner.
14. Press the x Start Color/OK button. The CX7000F Series begins charging ink
and Charging appears on the display.
Charging takes about one minute. When it’s finished, 5.Replace Cartridge
appears on the display.
Caution:
Never turn off the CX7000F Series while Charging appears on the display or you’ll
waste ink.
Note:
If you see an ink cartridge error message on the display, the ink cartridge may not
be installed correctly. Press the
x Start Color/OK button and reinstall the ink
cartridge until it clicks into place.
15. Press the y Cancel/Back button until you return to the screen displaying the
date.
Caution:
If you replaced a cartridge while copying a photo or document, cancel printing and
make sure your original is still placed correctly on the document table. Then copy
your original again.
Start
Color OK