Electrolux 57700 - Manual (Page 26)

26
If the water quality in
your household deviates
strongly from normal
and you wish to adapt
the drying extent
recognition of the dryer
to your water quality:
1) Bring the program selector to the setting LIGHT.
2) Hold the DELAY TIMER button depressed for five
seconds.
The current setting appears in the RUNTIME display: H1 is
the standard setting (optimised for water with degree of
hardness 2 and 3), with H2 (for water with degree of
hardness 4) the laundry becomes damper, with H0 (for
water with degree of hardness 1) the laundry becomes
dryer
1
.
3) Press the DELAY TIMER button as many times as
necessary to bring the desired value into the display.
To take-over the selected setting permanently:
4) Turn the program selector.
The selected setting is therewith fixed-programmed.
1) The local water works can provide information regarding the water hardness and
the hardness range in your domestic area.
Purpose Execution