Electrolux 111 K - Manual (Page 12)

12
Important safety requirements
OVERALL DIMENSIONS Width: 580 mm.
Depth: 500 mm.
Height: 88 mm.
CUT OUT DIMENSIONS Width: 550 mm.
Depth: 470 mm.
SUPPLY CONNECTIONS Electric:
230-240V 50Hz supply.
HEATING ELEMENTS RATING
Rapid Front Left Hotplate Ø 180 mm. 2090 W
Rapid Back Left Hotplate Ø 145 mm. 1570 W
Rapid Back Right Hotplate Ø 180 mm. 2090 W
Rapid Front Right Hotplate Ø 145 mm. 1570 W
Total Rating 7320 W
Instructions for the Installer
Engineers technical data
This hob must be installed in accordance with the IEE Wiring Regulations (Current Edition).
Detailed recommendations are contained in the following British Standards Codes Of Practice:
B.S. 6172/ B.S. 5440, Par. 2 and B.S. 6891 Current Editions.
Location
This hob has been registered as a "Class Y" appliance according to Fire Risk Regulations.
Minimum distances detailed below must be observed.
The hob may be located in a kitchen, a kitchen/diner or bed sitting room, but not in a bathroom
or shower room.
Before making the cut out in the worktop ensure that there is a minimum distance of 55 mm.
between the rear edge of the hob and the wall. A minimum distance of 100 mm. must be left
between the side edges of the hob and any adjacent cabinets or walls.
The minimum distance combustible material can be fitted above the hob in line with the
edges of the hob is 400 mm. If it is fitted below 400 mm. a space of 50 mm. must be allowed
from the edges of the hob. The minimum distance combustible material can be fitted directly
above the hob is 700 mm.