92 midi implementation – Edirol V-4 User Manual

Page 92

Advertising
background image

92

MIDI implementation

●

Program Change

Status

2nd byte

----------------------------------------
CnH

ppH

pp= program number:00H - 7FH (prog.1 - prog.128)
*

When you select channel A or channel B inputs, make memory settings, or specify how
sub-channels are mixed in Presentation mode, these messages will be transmitted in
conjunction with Bank Select messages. For details, refer to the section on Bank Select.

●

Channel Pressure

Status

2nd byte

----------------------------------------
DnH

vvH

*

Just as for Control Changes, the messages assigned in MIDI Setup will be transmitted
when you operate the panel. For the factory settings, refer to “Settings Transmitted/
Received Using MIDI” (p. 95).

●

Pitch Bend Change

Status

2nd byte

3rd byte

--------------------------------------------------------------------
EnH

llH

mmH

mm, ll= pitch bend value:00 00H - 40 00H - 7F 7FH (-8192 - 0 -+8191)
*

Just as for Control Changes, the messages assigned in MIDI Setup will be transmitted
when you operate the panel. For the factory settings, refer to “Settings Transmitted/
Received Using MIDI” (p. 95).

Advertising