Elo TouchSystems Elo Entuitive 1749L Series - Manual (Page 13)

STEP 2-Connecting the Serial or USB Touchscreen Cable
• Connect the female end of the serial (RS-232) cable to the serial port on your
• Connect the male end of the serial cable to the serial touchscreen connector
• Secure the cable to your touchmonitor and PC by turning the screws on the
connector.
PC, or connect the USB touchscreen cable to the USB touchscreen connector
on the back of your touchmonitor.
on your touchmonitor, or connect the other end of the USB touchscreen cable
to your PC.
•
•
• DO NOT connect the serial and the USB cables. Connect one or the other,
but not both.
ET1749L shown (ET1746L does not have DVI-I connector)
USB CONNECTOR FEMALE 9-PIN SERIAL
TOUCHSCREEN CONNECTOR
SERIAL OR USB TOUCHSCREEN CABLE
2-9