Before use, Fitting the door handles, Packaging – Electrolux 2498-6 GA User Manual

Page 8

Advertising
background image

8

818 20 67-00/2

Before Use

Packaging

0

1. Remove all adhesive tape and packaging from the interior of the appli-

ance.

3

Any remnants of adhesive can be removed with white spirit.

2. Remove the transport protection pieces and pull off the adhesive tape.

3. Wash the inside of the appliance with lukewarm water with a little

bicarbonate of soda added (5 ml to 0.5 litre of water). Do not use soap
or detergent as the smell may linger. Dry the appliance thoroughly.

Fitting the Door Handles

1

Caution! Do not use excessive force and overtighten the screws (max. 2
Nm) as you may damage the door handles.

0

1. Screw the top handle bracket to the

handle rod (1). Fit the bottom han-
dle bracket on the lower left-hand
side of the door (2).

Advertising