Epson 3260 - Manual (Page 33)

4. Plug the other end of the cable into the computer. If there is a
ground wire at the computer end of the cable, attach it to
the ground connector at the back of the computer.
Note:
If you want the power cord or interface cable to be on the opposite side,
route it through the slot on the back
Using Software Programs
To take full advantage of your printer’s features, find the
instructions for your software programs below. Also see the
software tips at the end of this chapter.
Microsoft Whdows 3.1 and all Windows Programs
If Windows is already installed on your system, follow the
steps below to set it up with your printer. Then your printer
will work correctly for all your Windows programs, such as
Word for Windows, Lotus'1-2-3-' for Windows, and
CorelDRAW.'
Setting Up the Printer 1-19