Elo TouchSystems Elo IntelliTouch - Manual (Page 103)

I n d e x - 9 1
Operating Relative Humidity, IntelliTouch
Touchscreens, B-62
Optical, IntelliTouch Touchscreens, B-62
Optional Parts for Serial Connection, 2-36
orientation of touchscreen, 2-16
output coordinates, 2-16
P
P4 Pins, 2-23
Parasitic Tap of 5Vdc, 2-44
Parasitic Tap of 7-30Vdc, 2-45
Physical Characteristics, 2500S serial controller, B-64
polarity, 2-26
Positional Accuracy, IntelliTouch Touchscreens, B-62
Power Connections, A-55
Power Connector, P4, 2500S serial controller, B-65
power supply, 2-26
problems
display, 2-16
with clearance between CRT bell and electronics
chassis, 2-29
protection, eye, 2-29
Protective Clothing, 2-6
R
radius of curvature (ROC), 2-15, 2-19
Re-assembling the Display, 2-47
Reassembling the Monitor, 2-29
reflector stripes, 2-16
Reliability, 2500S serial controller, B-64
Remove the CRT, 2-15, 2-16
Remove the Electronic Chassis, 2-13
Removing the Back Case, 2-12
Removing the LCD, 2-37
Removing the Rear Case, 2-37
Required Parts for Serial Connection, 2-35
Required Parts for USB Connection, 2-35
Resolution, IntelliTouch Touchscreens, B-62
Reversing polarity, 2-26
rotation of touchscreen, 2-16
Routing the Touchscreen Cables, 2-29
RS-232 Connections, A-54
S
safety
equipment advisory, 2-29
requirements, 2-29
warning, cable reconnection, 2-30
Safety Information, 2-5
Safety Information, CRT Integration, 2-8
Safety Information, flat panel display, 2-32
SAWDUMP, A-52
Sealing, 2-41
Sealing Material Selection, 2-31
Sealing the Monitor, 2-30
sealing touchscreen to CRT, 2-19
Serial Controller, A-52
Shock and Vibration, 2500S serial controller, B-64
shorts, electrical, 2-29
Software Troubleshooting, A-50
spacers, 2-20
spacing CRT from bezel, 2-20
Spacing the LCD from the Bezel, 2-41
Specifications, B-61
spring hooks, 2-30
stripes, reflector, 2-16
Suggested Tools, CRT Integration, 2-9
Summary of Installation Steps, 2-33
Summary of Installation Steps, CRT, 2-10
Supply Voltage and Current, 2500S serial controller, B-64
Surface Durability, IntelliTouch Touchscreens, B-62
Surface waves, 1-1, 1-2
System Evaluation, 2-31
T
tapes for mounting touchscreen, 2-19
Temperature, 2500S serial controller, B-64
Temperature, IntelliTouch Touchscreens, B-62
testing
display, 2-30
flat panel, 2-33
Testing the Monitor, 2-11
thickness of touchscreen and tape, 2-20
Thru-hole locations, 2500S Serial Controller, B-69
Tools and Equipment, disassembling the LCD monitor, 2-
35
Touch Activation Force, IntelliTouch Touchscreens, B-62
Touch Resolution, 2500S serial controller, B-64
touchscreen
aligning on CRT, 2-19
care and cleaning, 2-20
clearance from bezel ribs/struts, 2-15
dust seal, 2-19
fit in bezel, 2-15
flat, orientation, 2-16
Installation Kit, 2-20
mounting, 2-20, 2-21