Macintosh system requirements – Epson 850N User Manual

Page 13

Advertising
background image

Introduction

2

◗

At least 50MB of free hard disk space for storing images
(100MB or more is recommended)

◗

VGA, Super VGA, or better display adapter and monitor

◗

Double-speed CD-ROM drive (quad-speed or faster
recommended) for installing the printer software

◗

Network connection to Ethernet

◗

A twisted-pair (10BASE-T) or thin coaxial (10BASE2)
cable (with a 50 ohm terminator, if necessary) to connect
the printer’s Ethernet card to your network.

Macintosh System Requirements

To use your printer and its software with a Macintosh, your
system should have:

◗

Any Macintosh or Power Macintosh model except the
Macintosh +, Macintosh 512, Performa

®

410,

PowerBook

®

100, and some early versions of the

Macintosh, such as the II or Classic

◗

System 7.1 or later (7.5 or later recommended)

◗

At least 16MB of RAM (20MB or more is recommended)

◗

At least 50MB of free hard disk space for storing images
(100MB or more is recommended)

◗

13-inch RGB display or better

◗

Double-speed CD-ROM drive (quad-speed or faster
recommended) for installing the printer software

◗

Network connection to Ethernet

◗

A twisted-pair (10BASE-T) or thin coaxial (10BASE2)
cable (with a 50 ohm terminator, if necessary) to connect
the printer’s Ethernet card to your network.

basket-int.fm Page 2 Wednesday, May 13, 1998 11:34 AM

Advertising